The extension system

Introduced by RFC-27 (opens in a new tab), the extension system enables frontend modules to insert UI elements into each other, and for these interactions to be configurable by system administrators.

ℹ️

Those familiar with the OpenMRS RefApp 2.x extension system (opens in a new tab) will be glad to know that the basic concepts here are similar, but simpler. “Extensions” are roughly the same thing as before, “points” are now called “slots,” and there is no longer anything like “apps,” which no one really understood anyway.

Key Concepts

The extension system posits two concepts: extensions and slots. An extension is a component. A slot is a place in the UI.

Extensions get rendered into slots. An extension gets associated with a slot in one of the following ways:

The extension names the slot in its definition, under slot[s].
A call to the attach (opens in a new tab) function.
A system administrator adds the extension to the slot using the slot’s add array.

When to use extensions and slots

The extension system should be thought of as a system for making behavior configurable by administrators. It should not be thought of way to reuse components across modules.

This key question is: Am I creating a collection of similar things, such as buttons or tiles, which an administrator might want to re-order or otherwise change?

If so, this may be a good place to use extensions.

What if I just want to mount something from one framework into something in another framework?

Just use the Single SPA mountParcel (opens in a new tab) function.

What if I just want to use a component from one module in a different module, and I can change both?

Consider exporting the component and using it the normal way.

Usage

Extensions are defined in the setupOpenMRS function of a module, in an extensions array. Each element of this array defines an extension, with a name and a load function. It may also specify the names of slots to attach the extension to by default. It may also specify a number of other things (opens in a new tab), some of which will be covered below.

Slots are components. There is an ExtensionSlot (opens in a new tab) React component. If you are working in a different framework and would like to create an extension slot, please get in touch with the OpenMRS Frontend 3.0 team on Slack.

Principles

Nomenclature

Naming extensions

An extension will have a name which identifies it. That name should describe what the extension does. It should not have anything to do with where the extension will appear in the application. It has no innate sense of place.

✅ Good extension names:

Vitals table
User avatar
Biometrics tile

❌ Bad extension names:

Top bar (“top” indicates a place)
Home page reports link (“home page” indicates a place)
Steve (names should be descriptive)

ℹ️

Note: You will likely see a lot of extension and slot names which are all lowercase with dashes. This is not necessary; it is better to give extensions names that are pleasant to read. Similarly, you will see many slots suffixed with “slot.” This is also not necessary.

Naming slots

A slot will also have a name which identifies it. That name should describe the location in the app that it represents. If it describes the things that can go in it, it should only use the most general terms imaginable—things like “button” or “tile” or “widget”.

✅ Good slot names:

Primary nav right menu
Patient header detail box
Form header buttons

❌ Bad slot names:

Patient address (too prescriptive about contents)
homepage-widgets-slot (should be Homepage widgets)
Extra buttons (too vague)

Styling

An extension should be as agnostic as possible to the context in which it appears. This means that you should avoid defining the size of an extension. Extensions should be responsive (within reason), such that the contents will adapt to a variety of different extension dimensions.

Slots should be responsible for as much styling as generically applies to all of their contents. If all of the extensions in a slot should have a border, the slot should apply the border. The slot should also be responsible for setting the dimensions into which the extensions will render.

A slot can apply styles to an extension with the following CSS selector:

.slot > * > * {
  ...;
}

Extension configurability

The beautiful thing about configurability in the extension system is that you don’t need to think about it. Extensions and slots have a standard configuration interface that allows administrators to add, remove, and re-order extensions, as well as specific configuration specific to an extension within a particular slot.

You can use useConfig as usual within an extension.

The schema for an extension can be specified using defineExtensionConfigSchema. If no schema is defined specifically for your extension, the extension will inherit the configuration of the module that contains it.

State

Sometimes, extensions are not as independent as we might wish they were, and have to expect some state from the slot in which they are mounted. Most commonly, extensions that pertain to a specific patient will accept a patientUuid parameter which can be used to fetch relevant patient information.

State is provided as a parameter to the ExtensionSlot or Extension components, and recieved as a prop by the extension.

See the ExtensionSlot API docs (opens in a new tab) for more.

Offline Support

For information about offline support, please see Offline Mode (opens in a new tab).

Order

By default, extensions will render into slots in the order that they are declared or attached. Extensions which are added by an administrator come last.

Extensions can provide an order index in their definition to influence the order in which they are rendered. This works like z-index (opens in a new tab) in CSS—similarly, it is a way of setting relative order among elements that don’t officially know about each other.

Administrators can also override the order of extensions within any slot by modifying the order configuration parameter of that slot.

Additional Resources

Short introductory videos:

For a terse technical description of the extension system, see the Extensions RFC (opens in a new tab).

Workshop

A live workshop was hosted on Zoom, providing a comprehensive introduction to the extension system, as well as practical problems. Recordings and materials are available below.

How the extension system works

For the extension system to work four things exist:

A generic component model with a defined lifecycle and loading mechanism
A way to define where extensions should be placed (so called “slot”)
A way to define an extension coupling it to (1)
A configuration for assigning available extensions from (3) to slots (2)

Let’s explore these four things in depth.

Behind the Scenes

For (1) the parcel mechanism of single-spa is used.

For (2) you can use the registerExtensionSlot function together with renderExtension. For frameworks such as React helper components may exist (e.g., ExtensionSlot).

For (3) you can define an extension in the return value from the setupOpenMRS function. An example for this:

function setupOpenMRS() {
  return {
    extensions: [
      {
        id: "foo",
        load: getAsyncLifecycle(() => import("./foo.component")),
      },
    ],
  };
}

As a shorthand for (4) you could already specify a target slot via the slot property in the previous code snippet. Without that convenience way you’d still be able to register it programmatically using attach:

// attaches an extension "foo" to a slot "foo-slot"
attach("foo-slot", "foo");

Generally, though this is either done at initialization time as a default, or explicitly via a user-provided configuration. The only exception can be found with “dynamic” (or “special”) slots. One example in this area is the workspace of the patient chart frontend module.

Extensions and Slots

An extension can be in any of the following four states with respect to an extension slot:

attached (set via code using attach and detach)
configured (set via configuration using: add and remove)
assigned (computed from attached and configured)
connected (computed from assigned using connectivity and online / offline)

Rendering

Extensions are rendered by following their exported lifecycle functions. The getAsyncLifecycle function from @openmrs/esm-react-utils is a convenience layer that already exports these lifecycle functions wired together with single-spa-react.

In a nutshell:

When the component should be rendered the load function is evaluated - in case of a Promise (via the asynchronously loaded import function) this first waits for the component to be available.
The component is placed into its lifecycle functions provided by single-spa-react.
The lifecycle functions bootstrap. mount. unmount, and update are exported.

These lifecycle functions are not magic - theoretically you could write them on your own, however, since the single-spa ecosystem already provides convenience wrappers such as single-spa-react for many frameworks we don’t recommend it.

To actually render also two more things need to be considered:

Does the extension render in offline or online mode, and which mode is the browser in?
What properties should be passed to the component which is rendered?

The answer to (1) is found in navigator.onLine. Only if offline was set to true or some object the component renders in offline mode. Likewise, if online: false was supplied the component will not render in online mode.

The answer to (2) are the meta properties along with the extension’s context (e.g., what slot it is rendered to) and its injected services. The injected services are defined via online or offline. In case of true, no services are injected. In case of an object the provided key-value pairs are interpreted as services, which should be injected depending on the connectivity case.

Store values Configuration system